Nowadays, induction lights are installed in the wardrobes of every family, one is to make it easier for everyone to choose, and the other is to organize the clothes. Today, the editor will introduce the installation method of the wardrobe induction lamp . Some friends who don't know what the wardrobe induction lamp is, come to understand!

　　1. What is a wardrobe sensor light?

　　The wardrobe induction lamp adopts a new type of high-efficiency white light LED technology, which is energy-saving and explosion-proof, suitable for use in various places; the secondary infrared detection and induction technology has high sensitivity and strong anti-interference ability. Features such as fast response speed; when the wardrobe door is opened, the light will be on, and when the door is closed, the light will be off; humanized design, aluminum alloy shell design, exquisite and fashionable; hidden fixing, only 2 screws can be installed; this infrared sensor Lamps are widely used in wardrobes, cabinets, bookcases and other spaces.

　　Second, the induction lamp has many advantages for the overall wardrobe lamp

　　1. When someone enters the sensing range of the switch, the dedicated sensor detects the change of the infrared spectrum of the human body, and the switch automatically turns on the load. The lights are on when people go, and the lights are off when people go, which is convenient to use, safe and energy-saving.

　　2. Zero-crossing detection function: non-contact electronic switch, prolonging the service life of the load.

　　3. Application of photosensitive control, switch automatic measurement, no sense when the light is strong.

　　Third, the installation steps of the wardrobe induction lamp

　　1. Check the voltage and turn off the power when installing. The power cord is connected to 220VC , 50(HZ) , and fixed on the inside of the wardrobe through the case with large flat-head tapping screws ( need to be fixed firmly and securely ) .

　　2. Wiring ( one wire of the lamp body power cord is connected to the live wire, one wire is connected to the neutral wire, pull the wire forcefully after wiring ) , do not drop; install the bulb, glass or back cover. How to use the wardrobe sensor light When using the wardrobe sensor light for the first time, refer to the instructions for use, take out the battery box, and install the battery. It takes 30 seconds to 1 minute to test the sensor for the first time ; when using, please put the sensor device outwards and the LED light downwards, because the sensor has infrared sensor for the human body, and the LED sensor light will not start if the heat source is not detected ; The heat source will continue to light up for about 15 seconds, and then it will gradually go out automatically when there is no heat source.